The View Up Here

Random scribblings about kites, photography, machining, and anything else

  • Flickr Gallery

Posts Tagged ‘Self-Contained’

A Self-Contained Stereo Field Recording Setup

Posted by Tom Benedict on 16/06/2016

A project I’ve been working on more or less led me by the nose toward a type of field recording I really enjoy doing. The project requires relatively long recordings of an ambient soundscape – an hour or longer. The recordings must be in stereo, and ideally serve to put the listener in the soundscape as completely as possible.

Because I can never really stop making noise, especially now that I’ve developed some rather energetic motor and vocal tics, the only way I’ve been able to pull this off is to set up my gear, leave it for an extended period, and recover it later. This drop and recover technique works great for these extended soundscape recordings. But because I often have to hike in for an hour or more to reach the locations I record in I’ve tried to shrink the setup as much as possible, resulting in a relatively compact arrangement. Here’s what I’m using at the moment:

Self Contained Stereo Recording - Front

It’s a self-built pseudo-SASS microphone array sitting on top of a vibration isolator that was made for attaching cameras to multirotors, which is then attached to my Tascam DR-70D recorder.

The vibration isolator took some modification to make it work for this application. I added a plate to the bottom that has a 1/4″-20 threaded hole in it. This lets it mount to practically any tripod or light stand, or to the top of my DR-70D using the camera attachment that came with it. The top of the mount had a 1/4″ through hole in it, but I had to make a big aluminum thumbscrew so I could thread it onto my DIY-SASS. It’s barely visible between the rubber balls on the shock mount in the photo above.

Self Contained Stereo Recording - Rear Quarter
In order for the shock isolator to work well I needed to use very flexible XLR cables to connect the mics to the recorder. And to keep things compact I needed them to be short. These are two things that make for some really hard to find cables. So like most of my gear I rolled my own.

The connectors are all from Neutrik and the cable is some leftover Mogami cable I had from building other sound bits. I really like the right angle female Neutrik connectors. They’re just as easy to use as the straight variety, and you can set the angle at which the cable comes out of the plug when you build the cable. I set mine to come out 45 degrees to the right to make the cable run a little cleaner and to clear the controls on my recorder.

Self Contained Stereo Recording - Back

The whole thing acts like a big wooden bobble-head doll. There’s not a lot of damping in the isolator, just a lot of spring, so once you thwack it it bounces around for a while. I’ll have to see how that works out in the field. Just testing indoors, though, the isolator does a good job of minimizing coupling between the tripod legs and the microphones. This should help minimize noise from grass, twigs, and branches that tap against the tripod legs during a recording. (This naturally occurring handling noise has ruined several recordings I’ve made in the past.)

The one obvious problem with this setup is that there’s no real way to monitor while recording. But since I’m leaving my gear in the field and walking away from it, it’s not really an issue for me.

I’m still working on wind protection. For light wind I have a lycra slip cover that goes over the pseudo-SASS. But for stronger wind I’ll need something more involved. (Hey, more problems to solve! My favorite!)


Posted in Audio | Tagged: , , , , , | 8 Comments »